Leroy L. Blackshear

The heat flux probe has been developed for measuring rapid fluctuations in fluid properties over a wide range of temperature. An internally cooled sensing element permits measurements in temperatures above the melting point of the materials used. Electrical compensating circuitry permits a low “effective” heat capacity to permit frequency responses in the kilocycle range under most operating conditions.

The instrument measures the rate of heat transfer between the environment and the internally cooled sensor. The method of measuring this heat transfer, and procedures for obtaining temperature from this information, are primary interest. Both steady-state and transient measurements are considered along with a discussion of the errors inherent in the system.

A. Murty Kanury

Starting with the Thompson/Cousins construction materials calorimeter work of 1959, several groups in this country have devised calorimeters to measure the thermo chemical response of materials exposed to fire.

Carr B. Neel

Test of the concept, which draws on research for Apollo, opens the way to considering retrofit systems and designing for new aircraft, where the protection system may involve little or no weight penalty.

M.H. Burgess

The paper discusses the use of experimental measurements to validate calculations of heat fluxes from pool fires. Flame emissivity and temperature and the effects of reflected radiation are treated in simple terms. Estimates of convection effects are made and a simple model of surface sooting proposed. More experimental measurements are required to confirm assumptions

Aero Research Instrument Department

With the advent of high temperature applications for solid, liquid and gaseous processes, it has become necessary to measure and/or control these elevated temperature processes. Wit the advance of materials research, thermocouples can now be used in many applications which heretofore have not been amenable to accurate or convenient temperature measurement.